Table of Contents
Advertisement
Fast Roaming (WPA2
Enterprise)
After finishing this web page configuration, please click OK to save the settings.
below the value (dBm) set here and adjacent AP (must be DrayTek AP
and support such feature too) with higher signal strength value
(defined in the field of With Adjacent AP RSSI over) is detected by
VigorAP 906, VigorAP 906 will terminate the network connection for
that wireless station. Later, the wireless station can connect to the
adjacent AP (with better RSSI).
With Adjacent AP RSSI over – Specify a value as a threshold.
Enable – Check the box to enable fast roaming configuration.
PMK Caching - Set the expiration time of the WPA2 PMK (Pairwise
master key) cache. PMK Cache manages the list from the BSSIDs in the
associated SSID with which it has pre-authenticated. Such a feature is
available for
WPA2 Enterprise
Pre-Authentication - Enables a station to authenticate to multiple
APs for roaming securer and faster. With the pre-authentication
procedure defined in IEEE 802.11i specification, the
pre-four-way-handshake can reduce handoff delay perceivable by a
mobile node. It makes roaming faster and more secure. (Only valid in
WPA2)
Enable - Enable IEEE 802.1X Pre-Authentication.
Disable - Disable IEEE 802.1X Pre-Authentication.
51
mode.
Advertisement
Table of Contents
