Table of Contents
Advertisement
Isolate members with
IP
WMM Capable
APSD Capable
MAC Clone
(for 2.4GHz only)
After finishing this web page configuration, please click OK to save the settings.
The default setting is "Disable".
If it is enabled, VigorAP will isolate different wireless clients according
to their IP address(es).
To apply WMM parameters for wireless data transmission, please click
the Enable radio button.
APSD (automatic power-save delivery) is an enhancement over the
power-save mechanisms supported by Wi-Fi networks. It allows
devices to take more time in sleeping state and consume less power
to improve the performance by minimizing transmission latency.
The default setting is Disable.
Click
Enable
and manually enter the MAC address of the device with
SSID 1. The MAC address of other SSIDs will change based on this
MAC address.
43
Advertisement
Table of Contents
