Table of Contents
Advertisement
2.
After clicking Wizard, select Mesh Root as the Operation Mode. The default Group Name is
VigorMesh. Change the name if required. Click Next to enter the next page.
On the WiFi Name & Password page, enter the WiFi Name and the password (should be the
same as the security settings set on the device's WUI). You can also enable 2nd SSID by
enabling the function of 2nd WiFi. Then click the Next button.
3.
On the Password Setting page, enter the admin password and confirm the password. Then
click Next for the APP to verify the password. If successful, the Finish button will appear.
138
Advertisement
Table of Contents
