Table of Contents
Advertisement
II-1 Operation Mode
This page provides several available modes for you to choose from for different conditions. Click
any one of them and click OK. The system will configure the required settings automatically.
Available settings are explained as follows:
Item
AP
Mesh
Note:
The Wireless LAN settings will be changed according to the Operation Mode selected here. For
detailed information, please refer to the section of Wireless LAN.
Description
This mode allows wireless clients to connect to the access point and
exchange data with the devices connected to the wired network.
Mesh Root – VigorAP must connect to a gateway with an Ethernet
cable.
Mesh Node – VigorAP can connect to other mesh roots via the
wireless connection. A mesh network creates one set of links
automatically and calculates the most optimal wireless path through
the wireless network back to a wired mesh root.
28
Advertisement
Table of Contents
