Network Ip Configuration; I-3-1 Windows 10 Ip Address Setup - Draytek VigorAP 906 User Manual

I-3 Network IP Configuration
After the network connection is built, the next step you should do is set up VigorAP 906 with proper
network parameters, so it can work properly in your network environment.
Before you can connect to the access point and start configuration procedures, your computer must
be able to get an IP address in the same subnet as this AP. If it's not connected to the same DHCP
Server with the AP or you're unsure, please follow the following instructions to configure your
computer to use the static IP address in the same subnet as the default IP address of this AP.
For the default IP address of this AP is set to "192.168.1.2", we recommend you to use "192.168.1.X
(except 2)" in the field of IP address on this section for your computer.
If the operating system of your computer is...
Windows 10 - please go to section I-3-1

I-3-1 Windows 10 IP Address Setup

Click the Start button (it should be located at the lower-left corner of your computer), then click the
Settings icon.
Double-click Network & Internet.
9