Table of Contents
Advertisement
Click OK to save the settings.
III-1-7 Time and Date
It allows you to specify where the time of VigorAP should be inquired from.
Available parameters are explained as follows:
Item
Current System Time
Enable NTP Client
Time Zone
NTP Server
Mail From
-
Assign a path for receiving the mail from outside.
User Name
-
Type the user name for authentication.
Password
-
Type the password for authentication.
SSL - Check this box to enable SSL certificate for the SMTP server.
StartTLS
-
Check this box to encrypt alert mail. However, if the SMTP
server specified here does not support TLS protocol, the alert mail
with encrypted data will not be received by the receiver.
Enable E-Mail Alert - VigorAP will send an e-mail out when a user
accesses the user interface by using web or telnet.
When Admin Login AP – Enable/disable the function. When it is
enabled, VigorAP will send out an e-mail to the recipient defined
above when a user tries to access VigorAP by entering login username
and password.
Description
Click Inquire Time to get the current time.
Select to inquire time information from Time Server on the Internet
using the assigned protocol.
Select a time protocol.
Type the IP address of the time server.
Use Default – Click it to choose the default NTP server.
97
Advertisement
Table of Contents
