Iii-1-7 Time And Date - Draytek VigorAP 802 User Manual

Click OK to save the settings.

III-1-7 Time and Date

It allows you to specify where the time of VigorAP should be inquired from.
Available parameters are explained as follows:
Item
Current System Time
Enable NTP Client
Time Zone
NTP Server
Daylight Saving
NTP synchronization
Click OK to save these settings.
server specified here does not support TLS protocol, the alert mail
with encrypted data will not be received by the receiver.
Enable E-Mail Alert - VigorAP will send an e-mail out when a user
accesses into the user interface by using web or telnet.
When Admin Login AP – Enable/disable the function. When it is
enabled, VigorAP will send out an e-mail to the recipient defined
above when a user tries to access into VigorAP by entering login
username and password.
Description
Click Inquire Time to get the current time.
Check it to inquire time information from Time Server on the Internet
using assigned protocol.
Select a time protocol.
Type the IP address of the time server.
Use Default – Click it to choose the default NTP server.
Check the box to enable the daylight saving. Such feature is available
for certain area.
Select a time interval for updating from the NTP server.
85