Driver Setup; Windows 98 Setup - Linksys PCMLM56 User Manual

Windows 98

Driver Setup

This user guide contains the instructions for setting up
the EtherFast 10/100 + 56K Modem PC Card under
Windows 95, 98 and NT 4.0. Check the diskette for
instructions on configuring the PC Card under all of the
other operating systems that the card supports.
Linksys does not write, maintain, or provide technical
support for the Linux operating system. Drivers for
Linux may be obtained from the World Wide Web. You
can also check the Linux page on the Linksys web site.
Linksys does not provide technical support for beta or
freeware operating systems.

Windows 98 Setup

Follow the instructions below to install your EtherFast
10/100 + 56K Modem PC Card on Microsoft Windows
98.
After installing the EtherFast 10/100 + 56K Modem PC
Card hardware in your computer, follow the instructions
below to install the EtherFast 10/100 + 56K Modem PC
Card's Windows 98 network driver from the card's pro-
gram disk.
The following setup instructions are for setting up your
EtherFast 10/100 + 56K Modem PC Card on the Final
Release of Microsoft Windows 98 Only. The drivers
included on the program disk are not compatible with
any beta version of Microsoft Windows 98.
Please keep in mind that the installation procedure for
the driver will vary slightly depending on the version of
Windows 98 you are using and your current system con-
figuration.
15