Linksys PCMLM56 User Manual page 32

Windows 95
6. Make sure that the following network components are
installed:
Client for Microsoft Networks
Client for Netware Network
Linksys EtherFast 10/100 + 56K PC Card (PCMLM56)
IPX/SPX-compatible Protocol
NetBEUI
There may be other components listed in addition to the
ones shown above. This is fine. However, if any compo-
nents listed above are missing, you'll need to install
them manually. Refer to page 76 in the Troubleshooting
section of this user guide.
For setup of the TCP/IP protocol, contact your system
administrator or consult Microsoft's documentation.
Linksys does not supply technical support for setup or
troubleshooting of the TCP/IP protocol.
7. In the Primary Network Logon box, select Client for
Microsoft Networks.
30