Windows NT
If You Have Problems
If the EtherFast 10/100 + 56K PC Card's coupler doesn't
light up after you restart your computer, you may need
to change your slot's boot setting in NT.
Follow these instructions:
Click on Start, Settings, Control Panel. Double-click
on the Devices icon. Scroll down in the Devices list to
EtherFast 10/100 + 56K PC Card. Click on Startup.
Verify that the Startup Type is set to Boot. If it isn't, use
your mouse to select it. Click OK, then Close. Choose
to restart your computer.
Note: If you receive errors about event log storage or if
there is not enough storage space to restart the server,
you need to reapply the NT service packs.
48