Linksys PCMLM56 User Manual page 79

Etherfast series 10/100 + 56k modem pc card

Hide thumbs Also See for PCMLM56:

Table of Contents

Appendix

Client for Netware Networks

If you plan on connecting to a Novell NetWare worksta-

tion, click on the Add button. Highlight Client and click

on Add. In the Network Client window, select

Manufacturer and choose Microsoft. Highlight Client

for NetWare Networks on the right, then click OK.

IPX/SPX-compatible Protocol

Click on the Add button

Choose Protocol and click on

the Add button. Select Manufacturer and choose

Microsoft. Under the Network Protocol box, highlight

IPX/SPX-compatible protocol. Click OK. If you have a

Dial-Up or AOL adapter installed, remove the IPX-SPX-

Compatible protocol for Dial-Up or AOL

NetBEUI

Click on the Add button. Select Protocol, then click on

Add. Under Manufacturer, choose Microsoft. Under

Network Protocol, highlight NetBEUI. Click OK. If you

have a Dial-Up adapter installed, remove the NetBEUI

for Dial-Up Adpater protocol.

4. If you were referred to this section by the Windows

setup instructions, please return to step 16 of the setup

now and continue following the instructions.

Note: For the setup and troubleshooting of the TCP/IP

protocol, contact your system administrator or refer to

the Windows documentation. Linksys does not provide

technical support for the setup or troubleshooting of the

TCP/IP protocol.

Table of Contents