Linksys PCMLM56 User Manual page 49

Windows NT
Click on the Protocols tab and select your settings.
For setup of the TCP/IP protocol, contact your system
administrator or consult Microsoft's documentation.
Linksys does not supply technical support for setup or
troubleshooting of the TCP/IP protocol.
Do the same for the Services tab. After your bindings,
settings, and services are set, click on the Close button.
Choose to restart your computer. If a service pack was
previously installed, you must reapply the service pack.
After NT restarts, be sure to log in. Look at the
EtherFast card's cable coupler. If your cabling is proper-
ly attached and the network is detected, the green Link
light will be on, and the Activity (ACT) light will be
flickering or solid.
The installation is complete. You can now access the
network at large through the Network Neighborhood
icon on the Windows NT desktop.
47