Starting Over In Windows - Linksys PCMLM56 User Manual

Appendix

Starting Over in Windows

Installing Windows 95 and 98 Network
Components from Scratch
If you experience installation difficulties, you may need
to re-install all of Window's networking components
from scratch. The instructions below explain how to
give your PC a clean sweep so that you can start the
EtherFast + 56K Modem PC Card's software installation
over.
1. At the desktop click on the Start button, highlight
Settings, click on Control Panel.
2. Double-click on the Network Icon.
3. Look at the box with the text that reads The following
network components are installed.
4. If the box has a component called Dial-Up Adapter,
skip forward to step 6. If it doesn't, go to step 5.
5. Remove any instance on the name Linksys in the box.
This includes IPX/SPX...Linksys, NetBEUI...Linksys,
and TCP/IP...Linksys. Also remove Client for Microsoft
Networks, Client for NetWare Networks, and File and
Printer Sharing for Microsoft Networks. In some cases,
removing one of these components may in turn auto-
matically remove other components as well.
6. For PCs with Dial-Up Networking and/or an AOL
adapter, remove any instance of the name Linksys, all
IPX/SPX protocols, all NetBEUI, all Clients, and File
and Printer Sharing for Microsoft Networks.
74