Linksys PCMLM56 User Manual page 47

Windows NT
12. Next, choose either Workgroup or Domain, then
enter the workgroup or domain name that you want your
PC to connect to. If you're not sure of the name, see
your Windows NT user guide(s) or contact your net-
work administrator for the proper settings.
When you're finished, click on Next, followed by
Finish. Choose to restart your computer. If a service
pack was installed previously, you must reapply the
service pack.
After NT restarts, log in. Look at the EtherFast 10/100
+ 56K Modem PC Card's cable coupler. If your cabling
is properly attached and the network is detected, the
green Link light will be on, and the Activity (ACT)
light will be flickering or solid. The installation is com-
plete. You can now access the network at large through
the Network Neighborhood icon on the Windows NT
desktop.
Note: If you receive errors about event log storage or if
there is not enough storage space to restart the server,
you need to reapply the NT service packs.
For instructions on how to use the modem, see page 49.
45