Linksys PCMLM56 User Manual page 48

Windows NT
Installing the EtherFast 10/100 + 56K Modem
PC Card (NT Networking is Already Installed)
1. When the Network window appears, click on the
Adapters tab.
Click on the Add button, followed by Have Disk. Put
the PC Card disk into drive A. When asked to supply
the path to the disk, type a:\ and click OK.
NT will ask you to supply the I/O Port, Interrupt,
Memory value, and Connection Type for the card. Good
values to start with are 0x300 and 0x320 (for the I/O
Port) and Auto (for the IRQ). Choose AutoSense for
the connection type.
2. When you're finished, click Close. NT will copy nec-
essary files to your computer.
3. When the Network window reappears, click on the
Bindings tab. Choose your bindings.
46