Linksys PCMLM56 User Manual page 14

Services
Follow the instructions below to install the 10/100 +
56K Modem PC Card's enabler program if your com-
puter doesn't already have services. You should have
some experience with copying and editing files before
continuing.
1. Boot up your computer.
2. Insert the 10/100 + 56K Modem PC Card's Program
Disk into drive A.
3. Copy the enabler.exe program from the disk's root
directory (a:\) to your computer's root directory. You can
use the Windows File Manager to accomplish this, or if
you are using DOS, simply type the following at the
MS-DOS prompt:
copy a:\enabler\carden.exe c:\
4. Load your system's CONFIG.SYS file into your
favorite text editor or word processor for editing. If you
are using DOS, for example, you might type:
edit c:\config.sys
5. Scroll through the CONFIG.SYS file. Find the line
that reads DEVICE=EMM386.EXE. The line will prob-
ably be located near the beginning of the CONFIG.SYS,
and it may vary slightly in appearance.
6. Once you find the EMM386 line, you will need to
add a command to the end of it in order to reserve an
area of memory for the PC Card's enabler to use. Add
the following command to the end of the EMM386 line:
NOEMS X=D000-D7FF
12