Linksys PCMLM56 User Manual page 30

Windows 95
If Windows 95 goes directly to the windows desktop
and does not display the New Hardware Found window,
refer to problem 1 of the Troubleshooting section of this
guide.
2. While the Update Device Driver Wizard window is
visible, put the EtherFast 10/100 + 56K Modem PC
Card program disk 1 into drive A and click on Next.
3. Windows will begin searching your floppy drive for
the correct device drivers.
A message will appear that reads Windows found the
Linksys + 56K Modem Fast Ethernet Adapter driver.
Click on Finish.
If Windows cannot find the driver for the card, skip to
problem 2 of the Troubleshooting section on page 63.
4. Windows 95 will begin copying a number of files
onto your computer.
28