Linksys PCMLM56 User Manual page 72

Appendix
• When dialing another modem, you receive a
response, but nothing else.
CONNECT
The remote modem may be waiting for you to type a
command.
• The modem speaker does not make any sound
when you're connecting to another modem
The software may have the speaker disabled. Use the
ATM1 to turn it on.
• The modem disconnects (looses the connection) in
the middle of use
The remote modem may have locked up. The telephone
line may have disconnected your call. Your software
may have turned off the DTR signal to the modem.
• The modem does not connect with another modem
There may be a problem with the remote modem if you
do not hear the high pitched tone from the remote
modem. Try redialing. If it still doesn't work, try a slow-
er speed.
• When the modem is connecting to another modem,
it reports a higher connect baud rate that it is real-
ly using
Go into Command Mode with your software and type
ATW2 then Enter. This tells the modem to report the
modem-to-modem baud rate instead.
70