Home Wireless-G PC Card
Chapter 4: Setting up the Home Wireless-G PC Card
The Home Wireless-G PC Card Setup Wizard will guide you through the installation procedure. The Setup Wizard
will install the driver and Wireless Network Monitor, as well as configure the PC Card.
NOTE: You must run the Setup Wizard before inserting the PC Card
into your computer.
Using the Setup Wizard
Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears,
enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
On the Welcome screen, you have the following choices:
Click Here to Start - Click the Click Here to Start button to begin the software installation process.
User Guide - Click the User Guide button to open the PDF file of this User Guide.
Exit - Click the Exit button to exit the Setup Wizard.
1. To install the PC Card, click the Click Here to Start button on the Welcome screen.
2. After reading the License Agreement, click the Next button if you agree, or click the Cancel button to end the
installation.
Chapter 4: Setting up the Home Wireless-G PC Card
Using the Setup Wizard
Figure 4-1: Setup Wizard's Welcome Screen
Figure 4-2: Setup Wizard's License Agreement
6