Linksys PCMLM56 User Manual page 65

Appendix
Troubleshooting Hints for Windows 95 and 98
Problem 1: Windows doesn't detect new hardware with
the EtherFast Card hardware installed, or detects new
hardware every time your start up your PC.
Solutions
You might not have inserted the PC card correctly or
securely into the appropriate slot of your computer.
Check that the card is securely inserted into the appro-
priate slot.
You may have previously aborted a new hardware setup.
Follow the directions on page 74.
Problem 2: Windows can't locate the driver for the
EtherFast Card device.
Solutions
You may have inserted the wrong diskette into your
PC's drive. The diskette may be defective or files may
be missing. Make sure the disk has files called
NETLM.INF, MFLM.INF, and MDMLM.INF in the
root of the floppy or in the Win95 or Win98 sub-direc-
tory.
Problem 3: The Windows Logon screen doesn't appear
after you restart your computer.
Solutions
Click on Start, Shut Down, then Close All Programs
and Logon as a Different User. If this solves the prob-
lem, your PC's manufacturer may have disabled
Window's networking. Contact your computer's manu-
facturer for help.
Problem 4: After entering a username and password, a
window appears that reads, "No Domain Server could
be found to validate your Username and Password."
63