Linksys PCMLM56 User Manual page 80

Appendix
Enabling PCMCIA Services in NT
To enable card and socket services in NT, click on
Start, Settings, Control Panel. Double click on
Devices. Scroll down the list until you find PCMCIA.
Highlight it and click Startup and choose Boot from
the options.
After you are done click on Close and restart your com-
puter. After the PC is restarted go to the same window
and make sure the service is Started. If the service can
not be started, see your laptop's documentation or con-
tact the manufacturer of the laptop.
Detecting the Modem under NT
1. After the driver for the card is installed, in order for
NT to be able to use the Modem, it has to be added to
the system. Click on Start, Setting, Control Panel.
Double click on Modems. Click on Add. The following
window will appear.
78