Chapter 3. Configuration
Modem Baud Rate
Set the operating speed of the
device. The selections are 1200, 2400, 4800, 9600, 19200, and
38400 bps.
Read Community Name
Enter the authentication strings used for SNMP management.
Match the T3SU 300 to the SNMP manager for read privileges.
Write Community Name
Enter the authentication strings used for SNMP management.
Match the T3SU 300 to the SNMP manager for write privileges.
Trap IP Addresses
Enter up to five IP addresses of SNMP managers to which the
T3SU 300 sends traps.
Trap Generation
This selection determines which trap types (if any) are generated by
the unit. Use this menu to enable or disable N
E
ND
QDSX A
3-8 on page 3-19 for trap descriptions.
3-16
, MIB II S
A
LARM
TANDARD
trap types. See Table 3-4 on page 3-17 through Table
LARM
T3SU 300 User Manual
port to match the connected
AUX
E
EAR
, N
, DTE P
T
ETWORK
EST
A
, F
ND
LARM
AR
, and
ORT
61200217L1-1