Table of Contents
Advertisement
Management Port
Assign the management port to be either LAN , FDL (facility
datalink), or the AUX P
Modem Mode
Select the
located on the rear panel of the T3SU 300, provides a telephone line
(POTS) for connecting to the internal V.34 modem. The modem
interface can be configured for dial-in service in VT100, SLIP, and
PPP modes. In addition, the T3SU 300 is capable of dial-out
operation to report error conditions. All modem options can be
configured in the D
M
ANAGEMENT
The D
Selections for the M
PPP, and SLIP. If the M
the PPP and SLIP options are available.
Modem Baud Rate
Set the operating speed of the
device. The selections are 1200, 2400, 4800, 9600, 19200, and
38400 bps.
Read Community Name
Enter the authentication strings used for SNMP management.
Match the T3SU 300 to the SNMP manager for read privileges.
Write Community Name
Enter the authentication strings used for SNMP management.
Match the T3SU 300 to the SNMP manager for write privileges.
61202217L1-1B
ORT
port function for your application. The
AUX
O
IALUP
C
ONFIGURATION
O
are described on page 64.
IALUP
PTIONS
M
ODEM
ANAGEMENT
T3SU 300 User Manual
.
menu located on the S
PTIONS
screen. See Figure 3-9 on page 57.
include dial-up options for VT100,
ODE
P
option is set to A
ORT
port to match the connected
AUX
Chapter 3. Configuration
port,
AUX
YSTEM
P
,
UX
ORT
59
Advertisement
Table of Contents
