Functions Of The Auxiliary Panel; Care And Cleaning - Kohler K-4026 Series Installation And Care Manual

Functions of the Auxiliary Panel

NOTE:
1. All functions will run as per the default value.
2. The front/ rear wash will stop automatically after 5 minutes. If the functions did not stop automatically, press
the function key again to deactivate the function.
3. Press the key to stop the dryer function, otherwise it will automatically stop after 4 minutes.

Care and Cleaning

A. General Cleaning
For best results, keep the following in mind when caring for your Kohler
product:
• Carefully read the cleaner product label to ensure the cleaner is safe for use
on the material.
• Always test your cleaning solution on an inconspicuous area before applying
to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately after
cleaner application. Rinse and dry any overspray that lands on nearby
surfaces.
• Do not allow cleaners to sit or soak on the surface.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as
a brush or scouring pad to clean surfaces.
• Be careful not to leave staining materials in contact with the surface for
extended periods of time.
• The ideal cleaning technique is to rinse thoroughly and blot dry any water
from the surface after each use.
1168908-X2-B
Press the key to
activate the rear wash, and
press it again to stop this
function.
Press the key to
activate the front wash,
and press it again to stop
this function.
Press the key
the dryer function, and press
it again to stop this function.
Signal Receiving
Area
Light Sensor
Power Key
38
to activate
Kohler Co.