Advertisement
Quick Links
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
please leave instructions for the
consumer
.
ORDERING INFORMATION
REACH 3/4.8L One-piece Toilet 305mm
Includes
REACH
Toilet Seat
(Hidden Hinge Base)
REACH 3/4.8L One-piece Toilet 305mm
Includes
REACH Quiet-Close
(Hidden Hinge Base)
REACH 3/4.8L One-piece Toilet 400mm
Includes
REACH
Toilet Seat
(Hidden Hinge Base)
REACH 3/4.8L One-piece Toilet 400mm
Includes
REACH Quiet-Close
(Hidden Hinge Base)
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm centers.
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305/400mm roughing-in
dimension.
See Roughing-in
·
Closet flange must be 305/400mm on-center from wall.
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
installation step
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2008).
WARNING: Risk of personal injury or product
damage
: Handle vitreous china products very carefully.
Vitreous china can break and chip if you overtighten
bolts and nuts.
WARNING: Risk of external leakage
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten one turn
past finger tight .
1203790-T01-A
.....................K-3983T
..................................K-4088T
..................K-3983T-S
Toilet Seat
..................................K-4087T
.....................K-4012T
..................................K-4088T
..................K-4012T-S
Toilet Seat
..................................K-4087T
.
. The fill valve
"
3/4.8L SKIRTED VITREOUS CHINA ONE-PIECE TOILET
S-TRAP 305mm K-3983T/K-3983T-S
S-TRAP 400mm K-4012T/K-4012T-S
·
·
·
3/4.8
(
)
.............................................................K-4088T
3/4.8
(
)
.............................................................K-4087T
3/4.8
(
)
.............................................................K-4088T
3/4.8
(
)
.............................................................K-4087T
·
·
·
140mm
·
305/400mm(
·
·
·
·
2008)
-1-
"
REACH
INSTALLATION INSTRUCTIONS
3/4.8
305mm ...................................K-3983T
305mm ................................K-3983T-S
400mm....................................K-4012T
400mm ................................K-4012T-S
)
305/400mm
ASME
Copyright Kohler China Ltd., 2013
-
(A112.19.2-
, 2013
Advertisement
Related Manuals for Kohler S-TRAP K-3983T
Summary of Contents for Kohler S-TRAP K-3983T
- Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
-
Page 2: Tools And Materials Required
TOOLS AND MATERIALS REQUIRED (Not supplied) · · 254mm 254mm (10") adjustable wrench · · 305mm 305mm (12") pipe wrench · · Metal file (file cut) · · Tape measure · · Tubing cutter · · Level · · Hacksaw ·... -
Page 3: Installation
Finished Wall Supply OF OUTLET Fig.#1 Kohler reserves the right to change marked dimensions without prior notice. INSTALLATION TO REMOVE EXISTING TOILET Turn off the water supply. Flush the toilet, and use a sponge to remove the remaining water from the tank and bowl. - Page 4 TO INSTALL BOWL Drain Hole Position the template and align with drain hole. Mark down the position of foot and 5 holes. Fig.#4 Drive holes on ground with the driver 10mm of 10mm (3/8"), then insert anchor to holes. 10mm Fig.#5 Install brackets.
- Page 5 Carefully align and lower the bowl. Apply weight to the bowl rim to let the outlet insert into plastic trap. Outlet Plastic Trap Fig.#9 Carefully thread the screws into the brackets, until toilet is secure. Alternately tighten left and right sides to prevent pulling the toilet off center.
-
Page 6: Push Button Installation
Install the tank lid and the seat. Use the supplied hardware pack for seat. Periodically check for leaks for several days following the installation. Connect the push button and flush valve. Fig.#13 FILL VALVE ADJUSTMENT Fill float with ballast Adjust the cam clockwise or counter- clockwise until the water level is at the marked water line. - Page 7 A. Partially close the water supply shut-off valve if the water pressure to the toilet is too tank is filling. high. Check the toilet performance following any such adjustment. B. Remove dirt or obstructions from the valve head. Flush the lines. IMPORTANT: Use only genuine Kohler parts as shown to avoid property damage. 1203790-T01-A...
-
Page 8: Consumer Responsibilities
CAUTION: Don t use any cement while installing the toilet. Heat expansion of the toilet may damage the feet of the toilet. Kohler will not be responsible for any damage because of using cement. WARNING: Risk of product damage. Do not throw into the toilet what is easy to block it, such as newspaper, paper pilch, sanitary towel.