Install The Remote Control Holder - Kohler K-4026 Series Installation And Care Manual

Installation of Remote Control Holder
Installation Steps:
NOTE: If the wall for installation is made of special material (such as wood board, density board and etc.),
suitable fixing methods shall be adopted.
NOTE: The place to install the remote control shall not be easily splashed by water.
Choose a mounting location for the remote holder that is easily accessible while sitting on the seat.
¨
Drill two holes with depth larger than 45mm on the wall by drill with a diameter of 6mm in accordance with
¨
the position of screw holes on the remote control holder. Installing the expansion tube into the holes.
Place the installation holder on the fixing hole.
¨
Peel off the release paper of double-sided tape at the back of holder.
¨
Fix the holder with screws and install it.
¨
Install the screw covers on the screws.
¨
Place the remote control on the holder.
¨
1168908-X2-B
>45
6
Remote Control Holder
Expansion Tube
Remote Control Holder
Screw Cover
18
Double-Sided Tape
Expansion Screw
Kohler Co.