Kohler K-4026 Series Installation And Care Manual page 16

13. Connect the Wiring Flexible Hose of Bidet Seat to Tee Connector
WARNING: Risk of personal injury. Make sure the plug (if plug-in connection is used) and receptacle
are dry. If any moisture is present, allow the area to dry before plugging the unit in.
If plug-in connection is desired, plug the pump in.
¨
Connect the refill tube.
¨
Connect the wiring harness (pump).
¨
Connect the level switch.
¨
Connect the wiring harness (bidet seat).
¨
14. Check Operation
NOTE: The flushing mechanism works best if it is quickly tapped, not held down for an extended period of time.
NOTE: There is an approximate eight-second delay between the flush and the tank refilling.
Flush the toilet and check for proper operation.
¨
Refer to "Homeowner's Guide" to check whether the bidet seat functions well.
¨
Refer to the troubleshooting chart if the toilet does not function properly.
¨
1168908-X2-B
Level Switch
Refill Tube
Push to Flush.
16
Wiring Harness (Pump)
Wiring Harness
(Bidet Seat)
Flexible Hose of Bidet Seat
Tee Connector
Kohler Co.