Kohler K-4026 Series Installation And Care Manual page 17

15. Secure the Vitreous Shell
CAUTION: Risk of product damage. Do not overtighten the screws when tightening. The vitreous shell
may chip or break if the screws are overtightened.
Insert a screw through both grommets.
¨
Insert a screw in both of the provided holes and tighten. Do not overtighten.
¨
Place a cap over each screw. The caps should be flush with the exterior of the shell.
¨
Caulk Base of Toilet
16. Complete the Installation
Cut a recess in the access cover using a utility knife at the spot marked on the access cover.
¨
Place the access cover over the opening in the back of the toilet.
¨
Caulk around the base of toilet and caulk the access cover to the vitreous shell.
¨
Kohler Co.
Screw
Grommet
Cap
Access
Opening
Toilet Back
Access Cover
17
Cut with
Utility Knife.
1168908-X2-B