Kohler K-4026 Series Installation And Care Manual page 14

Level Switch Wire
Wiring Harness Plug
(Connected to Pump)
11. Install Gasket and Collar
Place the wiring harness plug, level switch wire, and refill tube on the floor so they extend out of the rear access
¨
opening.
Tape them to the floor so they will not be pinched or damaged.
¨
Fix the gasket to the tank and press tight.
¨
Install the collar onto the tank.
¨
Clip the spray shield into place over the fill valve.
¨
1168908-X2-B
Wiring Harness Plug
(Connected to Bidet Seat)
Tape
Electrical Plug
Tank
Inlet Tube
Refill Tube
14
Refill
Tube
Gasket
Collar
Spray Shield
Tank
Kohler Co.