Kohler K-4026 Series Installation And Care Manual page 13

9. Check the Waterline
NOTE: The waterline is a notch inside the tank, marked with a label.
Turn on the water supply.
¨
Use a flathead screwdriver to turn the manual switch counterclockwise to open the matorized valve.
¨
Verify the inlet valve is set to the correct waterline. Adjust if needed.
¨
To adjust the waterline, use a flathead screwdriver to gently turn the adjustment rod counterclockwise to lower
¨
and clockwise to raise the waterline setting.
IMPORTANT! The valve will not operate if the valve is locked.
Return the manual switch into the locked position by using a flathead screwdriver to turn it clockwise.
¨
Stop the shut off value.
¨
10. Remove Cap on Tee Connector of Flexible Hose
Kohler Co.
Waterline
Unlock
Adjust
waterline
13
Lock
1168908-X2-B