7. Secure the Tank
CAUTION: Risk of product damage. Do not overtighten the mounting nuts. Do not shorten the T-bolts.
Place a washer on each T-bolt.
¨
Thread a nut onto each T-bolt.
¨
Hand tighten the nuts.
¨
NOTE: In case there is no floor flange, please fix the tank with the expansion bolt kits. Specific installation steps
are decided by the installer.
8. Connect the Water
IMPORTANT! If this installation replaces an existing toilet, a hose other than the one shipped with the water
supply may be used. Use a stainless steel, burst-resistant hose.
Connect the water.
¨
Open the shut-off valve.
¨
1168908-X2-B
Nut
Washer
T-Bolt
Base of
Tank Unit
12
Kohler Co.