Kohler K-4026 Series Installation And Care Manual page 40

Care and Cleaning (Cont.)
C. Clean or Replacement of the Filter
If the user finds that the volume of flushing water becomes smaller or there is no flow, please clean or replace
the strainer in time.
Filter Cleaning
ò
Disconnect the power
Disconnect the power, close the water stop valve and remove the filter rubber.
¨
ë
Remove the filter, clean the filter.
¨
Reinstall the filter properly, connect the hose coupler and open the water stop valve.
¨
Check connecting places and connect the power if there is no leakage.
¨
Replacing the Filter
Steps are the same as above.
NOTE: It the filter has been damaged or seriously blocked, please replace it in time.
1168908-X2-B
ù
Close the water
stop valve
40
ä
ö
Kohler Co.