Preset - Kohler K-4026 Series Installation And Care Manual

Preset

A. Preset
During usage, current settings could be saved, including: water temperature, water pressure and nozzle
position of front wash; water temperature, flushing strength and nozzle position of rear wash; air temperature
and seat temperature and etc.
ê
Holding the preset key
down for more than 2 seconds
to save current setting
NOTE:
1. During saving, the remote control saves current settings as a package, including water temperature, water
pressure and nozzle position of front wash; water temperature, water pressure and nozzle position of rear
wash; wind temperature of dryer and seat temperature and etc.
2. Parameters could only be updated by resaving; changing of batteries will not affect parameters saved.
3. The user could save two groups of individual parameters. Operation method of "Preset 2" is the same as
that of "Preset 1"
B. Using Preset
For example: If the user wants to use Preset1
â
Preset could be used when flush and dryer functions are not activated.
ê
Press the key
ô
Display " Preset 1" and use parameters saved in
NOTE:
1. When the parameter is modified again,
hold down for more than 2 seconds.
1
2. The presetting could not be used when the front/ rear wash or dryer functions are "On".
3. If "Preset 1: blank" is displayed when the key
Kohler Co.
â
1
û
Press the key
ô
After the settings have been saved,
"Preset 1:Saved" will be displayed
Preset 1:saved
AUTO AUTO
1
1
Preset 1
AUTO AUTO
If using the toilet at this time, it will operate under the individual setting
of yours. If you feel dissatisfied with these settings, you may modify in
accordance with "Preset" .
will disappear. If you want to save the current parameter, please
1
is pressed, no individual setting has been saved.
1
35 1168908-X2-B