Kohler K-4026 Series Installation And Care Manual page 10

3. Install the Electrical Service and Water Supply
DANGER: Risk of electric shock. Disconnect power before servicing.
DANGER: Risk of electric shock. For plug-in installations/wall-mounted electrical supply:
Connect only to a properly-grounded, grounding-type receptacle which is protected by a Ground-Fault
Circuit-Interrupter (GFCI). Do not remove the grounding pin or use a grounding adapter.
DANGER: Risk of electric shock. For hardwire installations/through-floor electrical supply:
Connect only to a properly-grounded, dedicated 220~240V, 15A, 50Hz circuit protected by a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB).
Install the Electrical Service
NOTE: This product is designed for installation with the electrical supply located through the wall. Refer to the
dimensional information for installation.
Follow the dimensional information exactly when installing a hardwire electrical supply.
Install the Water Service
NOTE: This product is designed for installation with the water supply located through the wall. Refer to the
dimensional information for installation.
4. Install the T-Bolts
Install two new 8mm (5/16") diameter T-bolts into the floor flange.
¨
Do not use white cement or high lime content cements to install this toilet. The expansion of cement due to
¨
a rise in temperature may make the toilet crack or cause damage. Kohler is not responsible for any damage caused
by installation with the use of cement.
1168908-X2-B
T-Bolts
Floor Flange
10 Kohler Co.