Kohler K-4026 Series Installation And Care Manual page 11

5. Install the Wax Ring
Place the wax ring in the putty ring located on the tank.
¨
6. Position the Tank
Mark the centerline on the floor.
¨
Align the tank over the floor flange.
¨
Lower the tank onto the floor flange. The T-bolts should align with the mounting slots in the base of the tank.
¨
Carefully align the tank on the centerline.
¨
Position the tank on the T-bolts.
¨
CAUTION: Risk of product damage. Do not push down on any part of the tank assembly other than
the cylinder. Damage may occur
CAUTION: Risk of product damage. Do not rock or lift the tank after placement. The seal created by the
wax ring may be broken, resulting in leaking.
Position the loose end of the refill tube out of the outlet ring.
¨
Kohler Co.
Press here on cylinder
Outlet
Ring
Tank
Centerlines
11
Refill Tube
T-Bolts
Floor Flange
1168908-X2-B