Directions For Use; Remote Control; Control Panel - Kohler Veil Comfort Height Homeowner's Manual

Directions For Use

A B H C D E

Remote Control

G
F
R S T
K
N P
M
L J Q

Control Panel

U V W
NOTE: Features can be activated using the remote control. Some features can be activated using the control panel on the
side of the seat.
NOTE: For features with multiple settings, press the plus or minus icon on the remote control to change the setting level.
The last setting used will be saved for the next use.
(A) - Cover: With the seat unoccupied, press to open or close the seat cover.
(B) - Seat: With the seat unoccupied, press to raise or lower the seat.
(C) - Eco Flush: Press to flush the toilet with 0.8 gpf (3.0 lpf).
(D and V) - Full Flush: Press to flush the toilet with 1.19 gpf (4.5 lpf).
(E) - Seat Temp: While seated, press to adjust the heated seat temperature. There are five settings.
(F) - Stop: Press to stop any activated wash features or the dryer.
(G and U) - Front: Press to activate the front wash feature. The feature will stop after approximately 5 minutes.
(H and R) - Rear: Press to activate the rear wash feature. The feature will stop after approximately 5 minutes.
(J and S) - Dryer: Press to activate the dryer. Press again to increase the air temperature. There are five settings.
(K) - Clean: With the seat cover down, press to run the UV cleaning cycle on the wand. Lift the seat cover to end the
cleaning cycle. The feature is active when the icon is blinking.
1385274-5-D
8 Kohler Co.