Siemens ACUSON Antares Instructions For Use Manual page 8

Conventions
Conventions used throughout this manual are listed below. Take a moment
to familiarize yourself with these conventions.
Warnings, Cautions, and Notes
WARNING: Warnings are intended to alert you to the importance of following
the correct operating procedures where risk of injury to the patient or system
user exists.
Caution: Cautions are intended to alert you to the importance of following
correct operating procedures to prevent the risk of damage to the system.
Note: Notes contain information concerning the proper use of the system and/or correct
execution of a procedure.
Control Panel Keys and Controls
Controls and keys located on the control panel are identified by uppercase
boldface type.
Example: Rotate the MENU control.
Keys located on the keyboard are identified by boldface type.
Example: Press the Patient key located on the keyboard.
On-Screen Objects
On-screen objects such as task card tabs, menu selections, buttons, entry
fields, names of forms and dialogs, and group boxes are identified by
boldface type.
Example: The system displays the Image task card.
Selection of On-Screen Objects
The SELECT key on the control panel functions as a point-and-select device
when used with the trackball (similar to a computer mouse). To select an
on-screen object (such as a task card tab or a button), roll the trackball to
position the pointer (cursor) on the object and then press the SELECT key
on the control panel.
v i
[ 1 ] I N S T R U C T I O N S F O R U S E