Controlling The Vcr From The Ultrasound System - Siemens ACUSON Antares Instructions For Use Manual

5 B e g i n n i n g a n E x a m i n a t i o n
Controlling the VCR from the Ultrasound
System
Use the selections in the VCR group box to control the VCR directly from
the Image task card.
To:
Start recording active screen to videotape.
Pause or resume playback or recording.
Stop recording.
View the videotape while searching forward.
View the tape while searching backward.
Rewind videotape without viewing (fastest rewind method).
Forward videotape without viewing (fastest forward
method).
Locate the next unrecorded section on the videotape.
Reset the counter (tape position).
The counter is displayed to the left of the Reset Counter
selection. The counter format is hours, minutes, and
seconds (hh:mm:ss).
Manually enter a tape position (in hours, minutes, and
seconds) using the keyboard.
Begin playing the videotape.
Eject a videotape from the VCR.
Display the image frame corresponding to the entered tape
position (in hours, minutes, and seconds).
5 - 1 8
[2] Instructions for Use
IMAGE:
Accessing a
Group Box
Use this selection:
(text box to the left of the
Index Value selection)
[ 1 ] I N S T R U C T I O N S
Ch 1
Tool Tip
Record
Pause
Stop
Forward
Search
Reverse
Search
Rewind
Fast Forward
Blank Search
Reset Counter
—
Play
Eject
Index Value
F O R U S E