Siemens ACUSON Antares Instructions For Use Manual page 129

Menu
Selection Tool Tip
High Th High Threshold
Opacity Opacity
Shading Shading
Bright Brightness
Blend Blend Color
[ 1 ] I N S T R U C T I O N S F O R
Description
Sets the high threshold value for the opacity curve.
Assigns a constant opacity value to all voxels at or above
the selected threshold.
Note: Use Opacity instead of High Th to adjust image
transparency.
Adjusts the overall percentage of opacity in the volume
to smooth image contours.
Adjusts the percentage of shading in the volume to
heighten contrast.
Adjusts shading for both 2D-mode data and Power
mode data.
Adjusts the percentage of brightness in the Power
mode data of the volume. An increase in brightness
increases the saturation of voxels that have a higher
voxel value (color data) and increases the brightness of
voxels that have a lower voxel value (color data).
When enabled, combines (blends) 2D-mode data and
Power mode data displayed within the volume quadrant.
When disabled, superimposes (overlays) Power mode
data on the 2D-mode data displayed within the volume
quadrant.
U S E
3 S y s t e m C o n t r o l s
Settings
1 to 255
0 to 100
0 to 100
0 to 100
On, Off
3 - 5 7