Siemens ACUSON Antares Instructions For Use Manual page 53

To clean the holders for transducers and coupling gel:
1. Remove the holder from the ultrasound system.
a. Reach under the holder to locate the tab on the holder. The tab
extends below the point of attachment to the ultrasound system.
b. Squeeze the tab towards the holder and pull the holder downward.
Holder attachment and detachment.
2. Clean the holder under running water, using a mild detergent and dry
with a lint-free cloth.
3. Reattach the holder to the ultrasound system.
Align the support on the holder directly below the point of
attachment on the ultrasound system and firmly push upwards until
the holder snaps into place.
[ 1 ] I N S T R U C T I O N S F O R U S E
2 S a f e t y a n d C a r e
1 Holder
2 Tab
3 Support
4 Point of attachment
2 - 3 1