Cine Graphics - Siemens ACUSON Antares Instructions For Use Manual

CINE Graphics

CINE bar
During CINE playback, a
CINE bar represents the status of the CINE memory buffer and contains the
following elements:
1 Left CINE marker – Indicates the beginning of the CINE data. This marker can be
repositioned to edit the length of the CINE data.
2 Frame Counter – Indicates the number of the active frame.
3 Rate Indicator – Indicates the rate of CINE playback. It can be set to 1, 2, 4, 1/8, 1/4,
1/3, 1/2, 2/3.
4 Right CINE marker – Indicates the end of the CINE data. This marker can be
repositioned to edit the length of the CINE data.
5 Frame Indicator – Indicates the location of the frame within the loop of CINE data. It
also indicates the direction the CINE data is moving for backward and forward review,
and can be scrolled one frame at a time or continuously.
[ 1 ] I N S T R U C T I O N S F O R
displays on-screen below the image. This
U S E
3 S y s t e m C o n t r o l s
3 - 4 5