3-Scape Editing Group Box (Option) - Siemens ACUSON Antares Instructions For Use Manual

3 S y s t e m C o n t r o l s

3-Scape Editing Group Box (Option)

Use the Editing group box to define an area within the volume to be
removed. The system removes displayed data only (2D-mode and/or
Power mode data).
Note: The system dithers the Editing Menu selections and the Rotate selection from the
3-Scape Parameter menu while the volume is automatically rotating.
Menu
Selection Tool Tip
Volume of Interest
Polygon
Trace
Parallel Cut
Niche
Large Eraser
Small Eraser
Undo Undo Last Edit
Last Edit
Undo All Undo All Edits
Edits
3 - 5 8
Description
Defines content of the volume (volume of interest).
Defines an irregular area from a drawn outline and then removes all the
voxels inside or outside of that area.
Defines an area from a free-form drawn outline and then removes all the
voxels inside or outside that area.
Selects a plane (layer) within the volume and then removes all the voxels
outside the selected plane.
Note: This selection is not available when VOI is enabled.
Removes all the voxels from the nearest corner of the volume to a
selected depth inside the volume.
Note: This selection is not available when VOI is enabled.
Displays the large eraser cursor for editing.
Displays the small eraser cursor for editing.
Removes the most recent edit. You can repeatedly select
Undo Last Edit to sequentially remove several previous edits.
Removes all edits.
[ 1 ] I N S T R U C T I O N S F O R U S E