Viewing Clips; Printing And Storing Images From Clips - Siemens ACUSON Antares Instructions For Use Manual

Viewing Clips

You can view (play back) a clip.
A clip graphic is displayed on each clip in the
other than full-screen).
Note: A clip graphic is displayed on each clip in the Review task card, regardless of
selected display format.
To play back a clip:
Note: To view a clip from a previous examination, load the related study to the Review
task card.
1. Select the Review task card tab at the bottom of the screen.
2. Activate the full-screen display format: either adjust the Format
selection on the upper left of the screen or position the trackball
pointer over the clip and then press the UPDATE VIEW key twice in
quick succession.
The system automatically plays back the stored clip continuously in the
forward direction.
3. To change the playback speed, roll the trackball to the Rate Indicator
on the clip bar below the graphic and press the SELECT key.
The system cycles through the available playback speeds.

Printing and Storing Images from Clips

Note: Multiple-frame images such as clips and volumes cannot be printed or copied to
the Filming screen.
Images stored from clips retain the clip bar graphics that were displayed
below the clip.
To print or store an image from a clip:
1. Play back the clip, then slowly rotate the CINE Wheel to stop playback
and display the required image frame.
2. Press the PRINT/STORE key assigned to the required function (printing
or storing).
[ 1 ] I N S T R U C T I O N S F O R
Review
task card (for display formats
U S E
5 B e g i n n i n g a n E x a m i n a t i o n
Example of
Rate Indicator
.
5 - 1 5