Connecting And Disconnecting Transducers - Siemens ACUSON Antares Instructions For Use Manual

Connecting and Disconnecting Transducers

Caution: Ensure that the system is in freeze before connecting and
disconnecting transducers. If a transducer is disconnected before the image is
frozen, the system will display an error message and it will be necessary to reset
the system before continuing to use it.
You can connect up to three transducers to the ultrasound system, with one
active
transducer being the
currently connected to the system display on the Image task card.
Transducer ports.
[ 1 ] I N S T R U C T I O N S F O R
transducer. The names of the transducers
U S E
1 Three 260-pin ports
for array transducers
4 S y s t e m S e t u p
4 - 1 7