System Delays & Timeouts (Addr 0000-0002); System Delays & Timeouts (Addr 0711, 0715-0717) - NAPCO Gemini GEM-P1632 Programming Instructions Manual

Page 22
ADDRESS 0000
EXIT
ENTRY
DELAY DELAY 1
LEFT RIGHT
(sec.)
(sec.)
[Default = 3C]
DATA ENTRIES DELAY/
TIMEOUT
LEFT RIGHT
blank (•) blank (•) 0 sec.
blank (•) F 15 sec.
1 E
30 sec.
2 D 45 sec.
3 C 60 sec.
5 0
90 sec.
7 8
120 sec.
F F
255 sec.
PROGRAMMING TIMEOUTS: Either use the tables provide or calculate your own timeout using the steps indicated.
WARNING: Timers have uncertainty of +0/-1sec, so a "time" of 1 second may actually timeout IMMEDIATELY.
ADDRESS 0716
CHIME
TIMEOUT
LEFT RIGHT
(¼sec.)
[Default = blank (•) 2]
CHIME TIMEOUT OPTIONS
DATA ENTRIES
TIMEOUT
LEFT RIGHT
blank (•) blank (•) 0 ¼sec. = 0 sec.
blank (•) 2 2 ¼sec. = ½ sec.
blank (•) 3 3 ¼sec. = ¾ sec.
blank (•) 4
4 ¼sec. = 1 sec.
blank (•) 5
5 ¼sec. = 1.25 sec.
blank (•) 6
6 ¼sec. = 1.5 sec.
blank (•) 7 7 ¼sec. = 1.75 sec.
blank (•) 8 8 ¼sec. = 2 sec.
F F
255 ¼sec. = 63.25 sec.
1. Select delay/timeout from the table shown.
2. Enter in corresponding address locations above (left and right digits).
3. For a desired delay/timeout not listed do the following:
A. Choose a desired delay/timeout, ex: 20
B. Divide it by 16
GEM-P1632 Programming Instructions
ADDRESS 0001
ENTRY
DELAY 2
LEFT RIGHT
(sec.)
[Default = 1E]
1. Select delay/timeout (0-255 sec.) from the table shown.
2. Enter in corresponding address locations above (left and right digits).
3. For a desired delay/timeout not listed do the following:
A. Choose a desired delay/timeout, ex: 20 sec.
B. Divide it by 16
EXIT/ENTRY DELAYS: Ap-
the following options "Entry/Exit 1, Entry/Exit 2, Exit/Entry Follower". For UL Installations, the
maximum exit delay is 60 seconds and the maximum entry delay is 45 seconds.
ADDRESS 0717
AC Fail
Report
LEFT
Delay
(min.)
[Default = blank (•) blank (•)]
AC FAIL REPORT DELAY OPTIONS
DATA ENTRIES
LEFT RIGHT
blank (•) blank (•)
blank (•) 1
blank (•) 2
blank (•) 3
blank (•) 4
blank (•) 5
blank (•) 6
blank (•) 7
F F 255 min. = 4 Hr., 30 min.
1 Quotient Left Digit
16 20
16
4 Remainder Right Digit
ADDRESS 0002
PGM2 Output
Access
LEFT RIGHT
Control
Timeout
(sec.)
[Default = 1E]
1 Quotient Left Digit
16 20
16
4 Remainder Right Digit
DEFAULTS: The defaults shown on this
RIGHT
page and on the following pages are auto-
matically set after exiting the Easy Menu
Driven Mode.
DELAY
0 min.
1 min.
2 min.
3 min.
4 min.
5 min.
6 min.
PROGRAMMING STEPS:
7 min.
1. Lookup desired Programming Option by
Address Location (highlighted in black).
2. Select the programming option data entry
from the tables shown.
3. Enter the selected data entry in the boxes
shown.
4. For more information on a programming
option refer to the Glossary at the end of this
manual.
ADDRESS 0711 ADDRESS 0715
ABORT
DELAY
LEFT RIGHT LEFT
(sec.)
[Default = blank (•) blank (•)]
ply only to zones programmed with
ADDRESS LOC.
Program
LEFT RIGHT
Option
ENTER DATA
NAPCO Security Systems
WI897B 8/98
RIGHT