System Delays & Timeouts - NAPCO GEMINI GEM-P1632 Programming Instructions Manual

Page 24
SYSTEM DELAYS & TIMEOUTS (ADDRESS 0000-0002, 1413, 1417, 2050 & 2055)
ADDRESS 0000
EXIT
DELAY
LEFT RIGHT
(sec.)
[Default = 3 C]
DATA ENTRIES DELAY/
LEFT RIGHT TIMEOUT
blank (•) blank (•) 0 sec.
blank (•) F 15 sec.
1 E 30 sec.
2 D 45 sec.
3 C 60 sec.
5 0 90 sec.
7 8 120 sec.
F F 255 min.
PROGRAMMING TIMEOUTS: Either use the tables provided or calculate your own timeout
using the steps indicated. WARNING: Timers have uncertainty of +/-1sec, so a "time" of 1
second may actually timeout IMMEDIATELY.
SYST EM DE LAY S & TIMEOU TS (ADDR ESS 1418 & 1419)
CHIME ADDRESS 1418
TIME
LEFT
(¼sec.)
[Default = 2 sec. = blank (•) 8]
CHIME TIMEOUT OPTIONS
DATA ENTRIES TIMEOUT
LEFT RIGHT
blank (•) blank (•) (0) ¼sec. = 0 sec.
blank (•) 2 (2) ¼sec. = ½ sec.
blank (•) 3 (3) ¼sec. = ¾ sec.
blank (•) 4 (4) ¼sec. = 1 sec.
blank (•) 5 (5) ¼sec. = 1.25 sec.
blank (•) 6 (6) ¼sec. = 1.5 sec.
blank (•) 7 (7) ¼sec. = 1.75 sec.
blank (•) 8 (8) ¼sec. = 2 sec.
F F (255) ¼sec. = 63.25
1. Select delay/timeout from the table shown.
2. Enter in corresponding address locations above (left and right digits).
3. For a desired delay/timeout not listed do the following:
A. Choose a desired delay/timeout, ex: 20
B. Divide it by 16
U
4. Press to save.
X
GEM-P1632 Programming Instructions
ADDRESS 0001
ENTRY
DELAY 1 DELAY 2
LEFT RIGHT
(sec.)
[Default = 1 E]
1. Select delay/timeout (0-255 sec.) from the table shown.
2. Enter in corresponding address locations above (left and right digits).
3. For a desired delay/timeout not listed do the following:
A. Choose a desired delay/timeout, ex: 20 sec.
B. Divide it by 16
U
4. Press to save.
EXIT/ENTRY DELAYS: Apply only to zones programmed with the following options "Exit/
Entry 1, Exit/Entry 2, Exit/Entry Follower". For UL Installations, the maximum exit delay
is 60 seconds and the maximum entry delay is 45 seconds. NOTE: Sensor Watch
Time Options are similar to above table, except in hours.
AC Fail
Report Delay
RIGHT
(min.)
[Default = 60 mins. = 3 C]
AC FAIL REPORT DELAY OPTIONS
DATA ENTRIES
LEFT RIGHT
blank (•) blank (•)
blank (•)
blank (•)
blank (•)
blank (•)
blank (•)
blank (•)
blank (•)
F
1 Quotient
16 20
16
4 Remainder
ADDRESS 0002
ENTRY PGM2 Output
Access Cntrl
LEFT RIGHT
(sec.) Timeout (sec.)
[Default = 1 E]
1 Quotient
16 20
16
4 Remainder
ADDRESS 1419
LEFT RIGHT
TIMEOUT
blank (•)
1 1
2 2
3 3
4 4
5 5
6 6
7 7
F 255 min. = 4 Hr., 30 min.
Left Digit
Right Digit
ADDRESS 1413
LEFT RIGHT
[Default = blank (•) blank (•)]
Sensor Watch
Left Digit
Right Digit
Report Cancel
[Default = zero minutes =
DEFAULTS: The defaults shown on this
page and on the following pages are
automatically set after exiting the Easy
Menu Driven Mode.
ADDRESS LOC.
Program
LEFT
Option
ENTER DATA
PROGRAMMING STEPS:
1. Lookup desired Programming Option by
Address Location (highlighted in black).
2. Select the programming option data entry
from the tables shown.
3. Enter the selected data entry in the boxes
shown.
4. For more information on a programming
option refer to the Glossary at the end of
this manual.
L
NAPCO Security Systems
WI1148B 10/06
ADDRESS 1417
ABORT
DELAY
LEFT RIGHT
(sec.)
[Default = 1 E]
ADDRESS 2050
Time
LEFT RIGHT
(Hrs.)
[Default = 24 HRS = 1 8
ADDRESS 2055
Window
LEFT RIGHT
(min.)
blank (•) blank (•)]
RIGHT