Cs Receiver Opt. (Addr 0170-0191, 0192-0213); Cs Receiver Opt. (Addr 0214-0235) - NAPCO Gemini GEM-P1632 Programming Instructions Manual

Page 26
ADDRESS 0170
CS Receiver 1
LEFT RIGHT
Format
blank (•)
Default for CS Receiver 1 Format depends on Easy Menu Question "RCVR FORMAT". [Default = •(blank) •(blank)] for
CS Receivers 2 and 3 Formats.
CS RECEIVER FORMATS: Up to 3 CS Formats may be programmed.
1. Select the desired CS Receiver Format from the table shown.
2. Enter in the corresponding right digit address location (left digit is not used) for each CS
Receiver. NOTE: Dark shaded data value box shows option not available.
CS RECEIVER 1 OPTIONS
Sum Check
3/1 with Extended Restores
RESERVED
RESERVED
CS RECEIVER 2 OPTIONS
Sum Check
3/1 with Extended Restores
RESERVED
RESERVED
CS RECEIVER 3 OPTIONS
Sum Check
3/1 with Extended Restores
RESERVED
RESERVED
CS RECEIVER OPTIONS: Select options for any of the three CS Receivers.
1. Select the desired option by circling
2. Add the data values (ex: 15=1+2+4+8) from the selected options.
3. Enter in address location (left and right digits).
NOTE: Dark shaded data value box shows option not available.
CS Receiver 1
0172 0173 0174 0175 0176 0177 0178 0179 0180 0181 0182 0183 0184 0185 0186 0187 0188 0189 0190 0191
Telephone
Number
R R R
(Digits 1-20)
CS Receiver 2
0194 0195 0196 0197 0198 0199 0200 0201 0202 0203 0204 0205 0206 0207 0208 0209 0210 0211 0212 0213
Telephone
Number
R R R
(Digits 1-20)
CS Receiver 3
0216 0217 0218 0219 0220 0221 0222 0223 0224 0225 0226 0227 0228 0229 0230 0231 0232 0233 0234 0235
Telephone
Number R R R
(Digits 1-20)
CS RECEIVER TELEPHONE NUMBERS: Enter telephone numbers for any of the three CS Receivers (Telco 1, 2 & 3).
1. Enter in right digit only (left digit is not used).
2. Enter up to 20 digits from left to right. NOTE: Leave trailing boxes blank (•).
3. Valid entries are: 1-9, B =
GEM-P1632 Programming Instructions
ADDRESS 0192
CS Receiver 2
LEFT RIGHT
Format
blank (•)
LEFT DATA
VALUES
)
(CIRCLE
LEFT DIGIT (SUM
1
OF DATA VALUES)
2
4
8
[Default = blank (•) blank (•)]
LEFT DATA
VALUES
)
(CIRCLE
LEFT DIGIT (SUM
1
OF DATA VALUES)
2
4
8
[Default = blank (•) blank (•)]
LEFT DATA
VALUES
)
(CIRCLE
LEFT DIGIT (SUM
1
OF DATA VALUES)
2
4
8
[Default = blank (•) blank (•)]
the data values for each digit (left and right).
ADDRESS 0172-0191 (RIGHT DIGITS 1-20)
R R R R R R
ADDRESS 0194-0213 (RIGHT DIGITS 1-20)
R R R R R R
ADDRESS 0216-0235 (RIGHT DIGITS 1-20)
R R R R R R
button, C = button, D = 3 sec. pause, E = Wait for dial tone, F = ignore location
ADDRESS 0193
CS Receiver 3
LEFT RIGHT
Format
blank (•)
ADDRESS 0171
RIGHT DIGIT (SUM
OF DATA VALUES)
ADDRESS 0193
RIGHT DIGIT (SUM
OF DATA VALUES)
ADDRESS 0215
RIGHT DIGIT (SUM
OF DATA VALUES)
R R R R R R
R R R R R R
R R R R R R
DATA CS RECEIVER 1 FORMAT
ENTRY
(•) Ademco Slow, Silent Knight Slow
blank
2 Radionics Fast
3 Silent Knight Fast
4 Radionics, DCI, Franklin Slow
5 Universal High Speed
B SIA
C Ademco Point ID
E Pager *
NOTE: * See Pager Format Options to
program Leading Digits for Pager Format.
RIGHT DATA
CS RECEIVER 1 OPTIONS
VALUES
)
(CIRCLE
1400Hz Handshake/Kissoff *
1
2300Hz Handshake/Kissoff *
2
Enable Zone Number on Pulse Alarm
4
Single Digit Only
8
RIGHT DATA
VALUES CS RECEIVER 2 OPTIONS
)
(CIRCLE
1400Hz Handshake/Kissoff *
1
2300Hz Handshake/Kissoff *
2
Enable Zone Number on Pulse Alarm
4
Single Digit Only
8
RIGHT DATA
VALUES CS RECEIVER 3 OPTIONS
)
(CIRCLE
1400Hz Handshake/Kissoff *
1
2300Hz Handshake/Kissoff *
2
Enable Zone Number on Pulse Alarm
4
Single Digit Only
8
NOTE: * If both are selected, 1400Hz
has priority over 2300Hz.
Default for CS Re-
ceiver 1 Telephone
Number depends on
R R R R R
Easy Menu Question
"CENTRAL PHONE
#".
[Default = blank (•)]
across digits 1-20 for
R R R R R
CS Receiver Tele-
phone Numbers 2
and 3.
R R R R R
NAPCO Security Systems
WI897B 8/98