Gem-P1632 Wiring Diagram - NAPCO Gemini GEM-P1632 Programming Instructions Manual

(NOTE 7)
(GEM-RP1CAe2) 2 LINE KEYPAD
NOTES: 1. ) ALARM CURRENT CAN BE INCREASED BY REDUCING STANDBY CURRENT BY THE SAME AMOUNT.
2. ) THE FOLLOWING DEVICES MAY BE PLACE ON THE REMOTE BUS: GEM-RP1CAe2, GEM-RP2ASe2, GEM-EZM816, GEM-X10, GEM-RECV8,
GEM-RECV16, RM3008, GEM-EVA1 AND WIZARD2.
LA1469B
11. ) THIS PANEL ONLY SUPPORTS ONE SMOKE DETECTOR IN ALARM FOR EACH ZONE.
E15
JP3
(E)
(E)
(E)
(E)
. BATTERY SHOULD BE REPLACED EVERY 5 YEARS.
NORMAL
JP1
KEYPAD
CONFIGURE
( - )
6