Direct Address Programming Example - NAPCO Gemini GEM-P1632 Programming Instructions Manual

Page 20

Direct Address Programming Example

Example: Program Zones 6, 7 and 8 as Exit/Entry Follower Zones.
DETERMINE THE DATA ENTRIES

1. Referring to ZONE FEATURES in the Programming Worksheets that follow, Exit/Entry Follower for Zones 5
through 8 are located at address 0506, left digit. Circle
2. Add the data values for Zones 6, 7 and 8: 2+4+8=14. From Tables 1 and 2, "14" (E) is entered as press
. The right digit (for Zones 1 through 4, none of which are Exit/Entry Follower Zones) is entered as a
blank (•).
ZONE OPTION
EXIT/ENTRY FOLLOWER
PROGRAM THE DATA ENTRIES
1. Enter the panel's Dealer Code (Default = 456789), then press the


) to all questions until "

 
  " is displayed; then press YES (
2. Answer NO (

NOTE: If you pass "

 
 ", scroll backward using the the
button to enter the Address Program Mode. Address "  " will display.
3. Press the

4. Press
will advance to the data field.
5. Press
6. Press to save.
Address 0506 is now programmed with "E•".
GEM-P1632 Programming Instructions
ZONES
LEFT DATA VALUES
SUM = 14 (CIRCLE
ZN08 ZN07 ZN06 ZN05
     
to access Address 0506. The data for both digits will display and the cursor
to enter an "E" in the left digit and press
the data values for Zones 5–8.
ADDRESS
0506
)
ZN04
L ADDR R
1 E 0506 blank (•)
ENTER DATA

button.
button.

to enter a blank (•) in the right digit.
WI897B 8/98
ZONES
RIGHT DATA VALUES
)
SUM = 0 (CIRCLE
ZN03 ZN02 ZN01
8 4 2
1

).
NAPCO Security Systems