Programming Overview - NAPCO Gemini GEM-P1632 Programming Instructions Manual


WI897B 8/98
The displays shown on the previous page will appear after a brief delay.
Use the the button to toggle the cursor between the 4-digit address field and the data entry locations.
Enter the address directly using the number buttons.
The contents of the address will be read automatically, along with the feature name and programming information. The
cursor will advance to the data field. Enter the required data directly using the number buttons.
Press to save the contents of each address.
EXIT DIRECT ADDRESS PROGRAM MODE: When done, press the
operation. The panel is now programmed with your default program.
The Keypad Programming Worksheets in the back are
provided as an address-programming reference to help
the installer modify his custom default program or to make
minor field alterations to an existing panel program. It is
recommended that the panel be uploaded to Napco's
Quickloader software following any keypad programming
and that the PCD3000's error-check feature be utilized to
reduce the possibility of programming omissions or con-
flicts.
Note: Most of the addresses shown comprise two data
entry locations, left and right digits. Program the left digits
on the left data-display segment, and the right digit on the
right segment. For those addresses having only one pro-
grammable nibble, program the right segment only; the
left segment should display a blank (•).
Keep the Keypad Programming Worksheets on file for
future reference.
General Programming Steps
1. Contact the central station to ascertain receiver
format, data format, event codes, subscriber numbers
and telephone number(s).
2. Select the desired features by circling
spective "address" boxes. Refer to the Programming
Options and Worksheets for guidance in selecting the
"data" (1,2,4,8) to be entered into those boxes.
3. Program the data entered in the boxes on the

worksheets into the respective addresses. The display
will show the entry numerically, but will display "0" for the

number 10, and letters "B", "C", "D", "E", and "F" for the
numbers 11 through 15, respectively. To program a 10,
press . To program 11 through 15, press
through
NOTE: See the Direct Address Programming Example on the following page.
NAPCO Security Systems
DATA ENTRY SELECTIONS
(BINARY VALUE CIRCLED)
 
 
 
 
   
the re-
   
     
     


Table 1. Determining data entry for a location (each
"nibble"). Numbers in parentheses indicate data for se-
lected zones or features. (See Programming Worksheets
that follow.)
, respectively.


button to exit and resume normal keypad
ENTRY
TOTAL
8 4 2 1 blank



8 4 2 1
 
8 4 1 2
 


8 4 3
 
8 2 1 4
 



8 2 5
   
8 1 6
   


8 7
4 2 1 8



4 2 9
 
4 1 10
 


4 11
2 1 12



2 13
1 14
15
GEM-P1632 Programming Instructions
Page 19
 
 
PRESS KEYPAD
DISPLAYS
 
•
 
1
 
2
 
3
 
4
 
5
 
6
7
 
8
9
 
0
 
B
 
C
 
D
E
F